GT100 - 4Cm

Bonjour,

Au sujet de la méthode des 4 câbles pour le boss gt100

je viens de voir que 2 méthodes est utilisée :

N°1 :
1- Guitare -> 'Input' GT100
2- 'SEND' GT100 -> 'Return' AMP FxLoop
3- 'SEND' AMP FxLoop -> 'Return' GT100
4- 'OUTPUT' GT100 -> 'Input' AMP

N°2 :

1: Guitare -> 'Input' GT100
2: "send" du GT 100 > AMP input
3: "send" de l’ampli au "return" du GT 100
4: line out du GT 100 au "return" de l’ampli.

savez vous la quelle est a utiliser ?
merci

GT-100: Four Cable Method Connections

The following are appropriate connections when using the "four-cable" method setup with the GT-100:

- Connect your guitar to Input of the GT-100.

- Connect the Send of the GT-100 to the input on your amp.

- Connect the Send on your amp to the Return on the GT-100.

- Connect the Output on the GT-100 to the Return on your amp.

After making the connections, be sure to turn on the SEND/RETURN loop in the GT-100:

1. Press the EFFECTS button.

2. Turn knob 4(SELECT) to choose the "S/R" icon.

3. Turn knob 3 to turn on the Send/Return Loop.

4. If desired, turn knob 4 to select the appropriate Mode for your setup. (For more details about the different S/R modes, see page 29 in the GT-100 manual).

5. To save the settings, press WRITE twice to and store them to a User patch location.


https://www.boss.info/us/suppo(...)3789/