Reference reverb tank

Vous vous poser surement des questions a quoi correspondes les références des Reverb Tank (4ab3c1b par exemple) et peut ont les changer par un autre modèle, ici quelques réponses (nota: ce n'est pas une publicité pour ce site, mais des réponses techniques)

https://www.amplifiedparts.com(...)pared
https://www.amplifiedparts.com(...)tions

Pour exemple une 4ab3c1b

Digit #1 = 4, meaning this is a Type 4 tank
Digit #2 = A, meaning the input impedance for this tank is 8 Ohms
Digit #3 = B, meaning the output impedance for this tank is 2,250 Ohms
Digit #4 = 3, meaning the decay time for this tank is Long
Digit #5 = C, meaning the connectors on this tank are Input Insulated / Output Grounded
Digit #6 = 1, meaning there is no locking device
Digit #7 = B, meaning the mounting plane is Horizontal, open side down

Si vous trouvez que votre 4ab3c1b (Long) a un temps trop long, vous pouvez la changer pour une:
4ab2c1b Medium
4ab1c1b Short
Sans problème technique!

C'est encore plus simple d'aller sur le site de Accutronics, onglet "products" !

http://www.accutronicsreverb.com/

PART NUMBERING SPECIFICATIONS FOR TYPE 1 & TYPE 4

EXAMPLE: 1EB2C1B

DIGIT #1 - REVERB TYPE
1 for Type 1 or 4 for Type 4

DIGIT #2 - INPUT IMPEDANCE
A = 8 Ohm
B = 150 Ohm
C = 200 Ohm
D = 250 Ohm
E = 600 Ohm
F = 1475 Ohm

DIGIT #3 - OUTPUT IMPEDANCE
A = 500 Ohm
B = 2250 Ohm
C = 10000 Ohm

DIGIT #4 - DECAY TIME
1 = Short (1.2 to 2.0 sec)
2 = Medium (1.75 to 3.0 sec)
3 = Long (2.75 to 4.0 sec)

DIGIT #5 - CONNECTORS
A = Input Grounded / Output Grounded
B = Input Grounded / Output Insulated
C = Input Insulated / Output Grounded
D = Input Insulated / Output Insulated
E = No Outer Channel

DIGIT #6 - LOCKING DEVICES
1 = No Lock

DIGIT #7 - MOUNTING PLANE
A = Horizontal Open Side Up
B = Horizontal Open Side Down
C = Vertical Connectors Up
D = Vertical Connectors Down
E = On End Input Up
F = On End Output Up